Guardian Imperial Locks DIN Mortice Deadlock
Quick Overview
Imperial Heavy DIN Mortice Deadlock. Made by Guardian Locks. Top quality handmade british locks and latches.
Available in Satin Brass, Satin Stainless Steel, Polished Stainless Stee (like chrome), IBMA Bronze antique brass or black with a matching striker and screws. They can usually be finished to match your door furniture for an additional fee when ordered at the same time.
63, 76 or 101mm overall case depth (see size chart.) Note that backset and case depth are two different measurements.
Can be supplied with a dust box to tidy up the stike plate area.
Rebate kit shown below.
Operation
Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn
Case
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons
Forend
Size 235mm X 25mm
Striker Plate
Type C
Deadbolt
Brass, with two hardened steel rollers. Throw 14mm
Cylinder options shown below.
A Lock Case
63mm, 76mm, 101mm
B Backset
45mm, 57mm, 82mm
Satin Brass is usually a stock finish. All others are specials and can take 7-10 days on average.
Available in Satin Brass, Satin Stainless Steel, Polished Stainless Stee (like chrome), IBMA Bronze antique brass or black with a matching striker and screws. They can usually be finished to match your door furniture for an additional fee when ordered at the same time.
63, 76 or 101mm overall case depth (see size chart.) Note that backset and case depth are two different measurements.
Can be supplied with a dust box to tidy up the stike plate area.
Rebate kit shown below.
Operation
Deadbolt operated by key from either side using a double cylinder or by key outside and thumb turn inside using a single cylinder with turn
Case
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons
Forend
Size 235mm X 25mm
Striker Plate
Type C
Deadbolt
Brass, with two hardened steel rollers. Throw 14mm
Cylinder options shown below.
A Lock Case
63mm, 76mm, 101mm
B Backset
45mm, 57mm, 82mm
Satin Brass is usually a stock finish. All others are specials and can take 7-10 days on average.