Guardian Imperial Locks DIN Mortice Latch
Quick Overview
Imperial Heavy DIN Mortice Latch. Made by Guardian Locks. Top quality handmade british locks and latches.
Available in Satin Brass, Satin Stainless Steel, Polished Stainless Stee (like chrome), IBMA Bronze or black with a matching striker and screws. They can usually be finished to match your door furniture for an additional fee when ordered at the same time.
63, 76 or 101mm overall case depth (see size chart.) Note that backset and case depth are two different measurements.
The deeper 101mm Latches are ideal for knobs, setting the knobs deep into the door to avoid finger trap situations and providing the traditional look provided that you have room for them.
Can be supplied with a zinc plated dust box to tidy up the stike plate area.
Rebate kit shown below.
OPERATION:
Latchbolt operated by lever handle from either side.
SPECIFICATION:
Pierced to accept 38mm centre horizontally and 38mm centre diagonally opposed bolt through fixing furniture, 63mm size pierced diagonally only.
LATCHBOLT.
Brass, reversible. Projection 12mm.
FOLLOWER.
Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
Satin Brass is usually a stock finish. All others are specials and can take 7-10 days on average.
Available in Satin Brass, Satin Stainless Steel, Polished Stainless Stee (like chrome), IBMA Bronze or black with a matching striker and screws. They can usually be finished to match your door furniture for an additional fee when ordered at the same time.
63, 76 or 101mm overall case depth (see size chart.) Note that backset and case depth are two different measurements.
The deeper 101mm Latches are ideal for knobs, setting the knobs deep into the door to avoid finger trap situations and providing the traditional look provided that you have room for them.
Can be supplied with a zinc plated dust box to tidy up the stike plate area.
Rebate kit shown below.
OPERATION:
Latchbolt operated by lever handle from either side.
SPECIFICATION:
Pierced to accept 38mm centre horizontally and 38mm centre diagonally opposed bolt through fixing furniture, 63mm size pierced diagonally only.
LATCHBOLT.
Brass, reversible. Projection 12mm.
FOLLOWER.
Brass, to suit 8mm square spindle. One-way action. Sprung to suit sprung lever handle furniture. For unsprung lever handle furniture heavy duty springing should be specified.
Satin Brass is usually a stock finish. All others are specials and can take 7-10 days on average.
Dimensions