Guardian Imperial Locks Euro Roller Deadlock
Quick Overview
Imperial Locks euro profile roller bolt deadlocks. Made by Guardian Locks. Top quality handmade British locks and latches.
Available in Satin Brass, Satin Stainless Steel, Polished Stainless Stee (like chrome or nickel), IBMA Bronze or black with a matching striker and screws. They can usually be finished to match your door furniture for an additional fee when ordered at the same time.
63 or 76 overall case depth (see size chart.) Note that backset and case depth are two different measurements.
Rebate kit shown below.
OPERATION:
Deadbolt operated by key from either side using a double cylinder or by key outside and thumbturn inside using a single cylinder with turn.
SPECIFICATION:
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons
DEADBOLT.
Brass, with two hardened steel rollers. Throw 14mm
CYLINDER.
Not supplied. May be used with the below cylinders:
Satin Brass is usually a stock finish. All others are specials and can take 7-10 days on average. Sometimes longer depending on component stock.
Available in Satin Brass, Satin Stainless Steel, Polished Stainless Stee (like chrome or nickel), IBMA Bronze or black with a matching striker and screws. They can usually be finished to match your door furniture for an additional fee when ordered at the same time.
63 or 76 overall case depth (see size chart.) Note that backset and case depth are two different measurements.
Rebate kit shown below.
OPERATION:
Deadbolt operated by key from either side using a double cylinder or by key outside and thumbturn inside using a single cylinder with turn.
SPECIFICATION:
Pierced to accept 20mm and 38mm centre bolt through fixing escutcheons
DEADBOLT.
Brass, with two hardened steel rollers. Throw 14mm
CYLINDER.
Not supplied. May be used with the below cylinders:
Satin Brass is usually a stock finish. All others are specials and can take 7-10 days on average. Sometimes longer depending on component stock.