British 5 Lever Espagnolette Bolts in Brass Bronze Chrome or Nickel

6867 5 Lever locking espagnolette bolts. Handmade in the West Midlands at one of the finest Brass British foundries.

This cremone bolt can be supplied with any British Handmade door knob or lever handle.

There is an outside handle option also that can have a keyhole or not. Max door thickness 51mm. Longer keys available for thicker doors up to 85mm.

Can be keyed alike as a special.

Cranked rod ends are available which provide an 8mm stand off. These are usually only specified where there is not enough timber to shoot into or the plates supplied as standard will not fit.

On standard 2134mm high bolts the handle will be set centrally unless otherwise stated. For extra lengths the handle will be set at 1067mm. (This is from the bottom of the withdrawn bottom bolt which usually means the bottom of the door leaf.) 32x30mm rod guides.

All available nickel, bronze, black, chrome and brass finishes are shown in the thumbnails to the left. Click on any picture to expand it.

All finishes are special order and are non returnable unless faulty.

Standard size is to suit an opening of 2134mm and can be cut down on site. Larger sizes are available, just call us!

Gearbox measures 170x48mm. Rods are 14x8mm.

Supplied with 2 keys as standard.

Some lever options are handed. If the lever points right, its right handed.

Many finishes are available laquered or Unlaquered. Unlaquered finishes patinate naturally and can be cared for without the need to strip the laquer.

Lead time approx 5 weeks from ordering.

Other designs below.